2.22.2 Genuine Scanmatik 3 Software Download and Installation Guide
Genuine Scanmatik 3 is a professional multibrand scanner designed for diagnostics of electronic control systems of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.
WARNING: new release will not work with the old versions of USB driver and the SM3 Wi-Fi module firmware, therefore:
- USB driver is updated automatically during installation. However, if an error occurs during installation, you need to update it manually through the Windows Device Manager. Check the Scanmatik USB-NDIS version equals 1.0.0.24.
- Before using new release with SM3 devices, be sure to update the Wi-Fi module to version V04 firmware update
Genuine Scanmatik 3 Features:
- Galvanic isolation of the USB port (with power)
- Redesigned protection of K-lines and CAN buses on a new element base
- Increased speed of work via Bluetooth by about 20%
- Pulsed power supplies of the company’s own design (no heating, wide input voltage range from 5 to 55V)
- Load-Dump power surge protection (when the generator is switched off on a running engine)
PC System Requirements
- Operating system Windows XP, Vista, Windows 7, Windows 8, Windows 10
- Processor clock speed, not less than (see minimum requirements for OS operation)
- RAM, not less than (see minimum requirements for OS operation)
- Free hard disk space, at least 7 MB
- With USB connection - the presence of a free USB 1.1 port
- When connected via Bluetooth, the presence of a Bluetooth adapter (built-in or external).
System Requirements for Tablet / Smartphone
- Operating system - Android 2.1 and higher;
- Supported architecture - all (ARM, X86, MIPS);
- With USB connection - USB-Host;
- With Bluetooth connection - Bluetooth module.
Download Links: PASSWORD (dkgcc)